Features of CNC water jet cutting machine
The cnc water jet cutting machine can cut almost every kind of material, including ceramics, rubber, plastics, plywood, glass, aluminum and copper, which can also cut hard materials up to 500 mm in thickness such as steel! A series of high-pressure pipes, pressure pump and booster force the filtered water to flow through the apertures within the drill. Water flow pressurized to up to 300,000 psi and fine abrasive carborundum mix within the conduit, in order to provide superior cutting forces. Movement controlled machine tool send nozzle along the programmed path, to cut the complex shapes with the position tolerance of ± 0.001 "(human hair fraction width). Because the tool doesn't contact with materials, it almost does not generate heat, so it can realize no deformation cutting even in the thinnest material. The abrasive water jet cutting process will never change any alloy smelting. It eliminates the stress of the material and the heat-affected zone, but never hardens metal or leave recast layer, other processing methods such as plasma and EDM machining (EDM) cannot obtain these features.
Maximum material utilization
When people choose CNC water jet machines, it is usually after they have used other methods and encounter costly material waste problem. CNC water jet cutting can cut out the narrow width kerf or cutting, which also makes it to complete parts nesting, maximize material utilization. These characteristics tend to make this process better than other processing methods, such as plasma cutting and EDM.
Saves time and money
One of the main advantages of CNC water jet machining is that it can crude parts before final machining to save time and money. The ceramic cutting machine act as a low-cost method to deal with unusual materials and composites. The device used for abrasive water jet cutting usually is made quickly. In most cases, the means is used at a certain distance to make the material to remain flat or the material is located from the reference edge.
The traditional processing requires the material to be in a relatively soft state. If necessary, the material is usually subjected to heat treatment after processing, which often causes deformation, shrinkage, elongation, or warping, and other issues. Carry out heat treatment for the material before CNC water jet machining can avoid grinding and reforming, which is caused by the deformation during the process of the heat treatment. In most cases, the metal cutting and drilling speed is nothing to do with the hardness of the material. Further, the minimum heat input of the process reduces the deformation and stress. CNC water jet cutting does not produce deformation, because it does not rely on an exothermic reaction to help the cutting process.
www.ceramic-machine.com is the brand professional ceramic machine manufacturer for producing different types of ceramic tile, stone, glass, deep processing machinery and equipment. We mainly produce Arc Edge Polishing Machine, Art Line Polishing Machine, Multifunction Polishing machine, water jet, automatic dry tangent and other ceramic deep processing equipment.
The article is come from:http://www.chinawoodenflooring.com/index.php/cnc-water-jet-cutting-machine-doesnt-need-heat.htm
More about my article, you also can read:http://industrialrawmaterials.techmaza.in